Smart Cruise Control Settings

Feature Settings

Activating Smart Cruise Control

• Press the Driving Assist button (Press the () button to activate Smart Cruise Control. The set speed will be set to the current speed shown on the cluster.
• If there is no vehicle ahead, the set speed will be maintained. If there is a vehicle ahead, the speed may be reduced to maintain the distance to the vehicle ahead. When the vehicle ahead accelerates, your vehicle will accelerate to the set speed and then continue at the set speed.

Information

• If your vehicle speed is within 0-20 mph (0–30 km/h) when you press the Driving Assist button, the Smart Cruise Control set speed will be set to 20 mph (30 km/h).
• The Driving Assist button symbol may vary depending on your vehicle's trim.

Setting the Following Distance

Each time the Distance button is pressed, the distance changes as follows:

Information

• If you are driving at 56 mph (90 km/h), the following distance is maintained as follows:
  Level 4 - approximately 172 ft. (53 m)
  Level 3 - approximately 130 ft. (40 m)
  Level 2 - approximately 106 ft. (30 m)
  Level 1 - approximately 82 ft. (25 m)
• The distance is set to the last distance setting when the engine is restarted, or when Smart Cruise Control has been temporarily canceled.

Increasing the Set Speed

• Press the + switch up and release it immediately. The set speed will increase by 1 mph (1 km/h) each time the switch is operated this way.
• Press and hold the + switch up until the desired set speed appears on the cluster. The set speed will increase by 5 mph or 10 km/h each time the switch is operated this way. Release the switch when the desired speed is displayed, and the vehicle will accelerate to that speed. You can set the speed up to 110 mph (100 km/h).

WARNING

Check the driving conditions before using the + switch. The vehicle speed may increase rapidly when you push and hold the + switch.

Decreasing the Set Speed

• Press the - switch down and release it immediately. The set speed will decrease by 1 mph (1 km/h) each time the switch is operated this way.
• Press and hold the - switch down until the desired set speed appears on the cluster. The set speed will decrease by 5 mph or 10 km/h each time the switch is operated this way. Release the switch at the speed you want to maintain. You can set the speed down to 20 mph (30 km/h).

Temporarily Canceling Smart Cruise Control

pressOperate the switch or press the brake pedal to temporarily cancel Smart Cruise Control.

Resuming Smart Cruise Control

To resume Smart Cruise Control after the function has been canceled, press +, -, orswitch.

If you press the + switch up or the - switch down, the vehicle speed will be set to the current speed shown in the instrument cluster.

If you press theswitch, and the vehicle speed will resume to the set speed.

WARNING

Check the driving conditions before using the switch. The vehicle speed may increase or decrease rapidly when you press the switch.

Deactivating Smart Cruise Control

Press the Driving Assist button (Press the () button to turn off Smart Cruise Control.

Information

If your vehicle is equipped with Manual Speed Limit Assist, press and hold the Driving Assist button to turn off Smart Cruise Control. However, Manual Speed Limit Assist will remain on.

Based on Driving Mode

Smart Cruise Control acceleration changes depending on the drive mode selected from the Integrated Drive Mode Control System. See the following diagram.

Information

• For more information on drive mode, refer to "Integrated Drive Mode Control System" in chapter 6.
• Smart Cruise Control may not turn on or off in some drive modes because the operating conditions are not met.
• If your vehicle is not equipped with the Integrated Drive Mode Control System, Smart Cruise Control accelerates your vehicle at normal levels.

Warning Volume

With the engine on, select "Driver Assistance > Warning Volume" in the Settings menu to change the warning volume for Smart Cruise Control to "High," "Medium," or "Low."

If you change the Warning Volume, the warning volume of other driver assistance systems may change.

Information

If the engine is restarted, the warning volume will retain the last setting.