Digital clock (if equipped)

WARNING

Do not adjust the clock while driving.

You may lose control of the vehicle and be involved in a traffic accident, resulting in injury or death.

After any disconnection of the battery or replacement of fuses, the time must be set again.

When the ignition key is in the ACC or ON position, the clock is controlled with the buttons as follows:

Setting the clock

With the audio system off

1. Press and hold the [SETUP] button until the clock on the display starts flashing.
2. Set the time by turning the knob (1), then press it.

With the audio system on

1. Press the [SETUP] button.
2. Select the [CLoCK] mode by turning the knob (1), then press it.
3. Set the time by turning the knob (1), then press it.
4. To exit the [SETUP] mode, press the [SETUP] button.