Compass Mirror Repair Procedures

Adjustment

Calibration Procedure: If "C" is displayed on the display, calibrate the compass.

1. 1
   Drive the vehicle in a circle at a speed of less than 8 km/h three times, or until the compass direction is displayed.
2. 2
   Driving in a circle in either a clockwise or counterclockwise direction is possible. When calibration is complete, the compass heading will appear.
3. 3
   Continue driving in a circle until the compass direction appears.
4. 4
   Determine the desired zone number based on your current location on the zone maps.
5. 5
   Press and hold the Function Control button for more than 6 but less than 9 seconds. The current zone number (B) will appear on the display.
6. 6
   Press and hold the Function Control button (A) again to increase the numbers (Note: they will repeat ... 13, 14, 15, 1, 2, ...). Release the button when the desired zone number appears on the display to set the new zone.
7. 7
   After approximately 5 seconds, the compass will again display the compass direction.
8. 8
   Press and hold the Function Control button (A) for more than 9 seconds. When the compass memory is cleared, the letter "C" will appear on the display (B).
9. 9
   To calibrate the compass, drive the vehicle 2 complete circles at a speed of less than 8 km/h.

   

To adjust the zone setting: To recalibrate the compass: Certain conditions may cause changes in the vehicle's magnetic field. Items such as installing a ski rack or antenna, or even some body repair work, may change the vehicle's magnetic field. In such situations, the compass must be recalibrated to quickly correct these changes. Zone Map