Hyundai Tucson LM Quiz
Engine Control System/Fuel System

Filler Neck Assembly Repair Procedures

In this manual: Engine Control System/Fuel System
General Information — 1Engine Mechanical System — 44Engine Electrical System — 45Emission Control System — 24Engine Control System/Fuel System — 93Clutch System — 13Manual Transmission — 18Automatic Transmission — 87Four-Wheel Drive (4WD) System — 26Drive Shaft and Axle — 29Suspension System — 35Steering — 20Restraints — 47Brake System — 36Body (Interior and Exterior) — 53Body Electrical System — 202Heating, Ventilation, and Air Conditioning — 58
4steps
~24min
2/5difficulty
010203040505.94N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Removal

  1. Remove the rear LH wheel, tire and inner wheel housing.
  2. Disconnect the filler hose (A) and the vent hose (B).
  3. Open the fuel tank filler door and remove the filler neck assembly mounting screw (A).
  4. Remove the filler neck assembly from the vehicle by loosening the bracket mounting nut (A).

Installation

  1. Install in the reverse order of removal. Filler neck bracket nut: 3.9 ~ 5.9 N·m

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.