Installing a Child Restraint System

WARNING

Before installing a child restraint system, always read and follow the instructions provided by the child restraint system manufacturer and in this manual to prevent serious injury or death in the event of a collision.

WARNING

If the vehicle headrest prevents proper installation of the child restraint system, adjust or remove the headrest for that seat position.

After selecting a suitable child restraint system for your child and checking that the child restraint system fits properly on the rear seat, there are three general steps for proper installation:

• Securely secure the child restraint system to the vehicle. All child restraint systems must be secured to the vehicle with the lap/shoulder belt or with the LATCH system in the rear seat of the vehicle. Make sure the child restraint system is securely installed. After installing the child restraint system in the vehicle, push and pull the seat forward and backward and from side to side to make sure it is securely attached to the seat. Install the child restraint system secured by the seat belt as tightly as possible. Some side-to-side movement can be expected.
• Secure the child in the child restraint system. Make sure the child is properly secured in the child restraint system in accordance with the child restraint system manufacturer's instructions.

CAUTION

Check the seat surface and buckles before placing a child in the child restraint system to prevent burns. A child restraint system in a closed vehicle can become very hot.