Manual Heating and Air Conditioning

The heating and cooling system can be controlled manually using the buttons or knobs, except the AUTO button. In this case, the system operates sequentially according to the order in which the buttons or knobs are selected.

✽ NOTICE

When any button (or any knob) other than the AUTO button is pressed (or turned) while using automatic mode, the non-selected functions will still be controlled automatically.

1. Start the engine.

2. Set the mode to the desired position.

To improve heating and cooling efficiency;

- Heating:

- Cooling:

3. Set the temperature control to the desired position.

4. Set the air intake control to the outside (fresh) air position.

5. Set the fan speed control to the desired speed.

6. If air conditioning is required, turn on the air conditioning system.

Press the AUTO button to switch to fully automatic control of the system.