Relay Box (Interior) Repair Procedures

Inspection

1. 1
   Make sure that there is no play in the fuse holders and that the fuses are securely installed.
2. 2
   Is the rating of the fuse specified correctly for each circuit?
3. 3
   Check for blown fuses. If a fuse must be replaced, always use a new fuse of the same capacity. Always determine why the fuse blew first and fully resolve the problem before installing a new fuse.

   

Inspection

1. 1
   The SJB can be diagnosed using GDS. The SJB communicates with GDS, which then displays the input and output data along with the codes.
2. 2
   To diagnose the SJB function, select the vehicle model, BCM and SJB.

   

3. 3
   To view the SJB input/output current value, select "Current DATA". It provides information on the SJB input/output conditions.

   

4. 4
   To perform a functional check of the SJB outputs, select "Actuation Test".

   

Removal

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the lower crash pad panel. (Refer to Group BD - "Crash Pad")
3. 3
   Remove the SJB (A) (Smart Junction Box) after removing the bolts, nuts and connectors.

   

Installation

1. 1
   Install the SJB (Smart Junction Box).
2. 2
   Connect the SJB connectors.
3. 3
   Install the emergency pad lower panel.