Body Electrical System

Intelligent Parking Assist System Sensor Repair Procedures

14steps
~84min
3/5difficulty
Done 0 of 14

Removal

Front SPAS sensor
  1. Remove the front bumper. (Refer to BD group - "Front Bumper")
  2. Pull out the SPAS sensor (A) by opening the sensor holder.
  3. Disconnect the connector from the sensor.
  4. Raise the vehicle and remove the front bumper. (Refer to Group GI - "Jacking and Lifting Points")
  5. Pull out the SPAS sensor (A) by opening the sensor holder.
  6. Disconnect the connector from the sensor.
  7. Remove the front bumper. (Refer to BD group - "Front Bumper")
  8. Pull out the SPAS sensor (A) by opening the sensor holder.
  9. Disconnect the connector from the sensor.
Rear SPAS sensor / Side SPAS sensor

Installation

Front SPAS sensor
  1. Install the SPAS sensor and connector.
  2. Install the front bumper.
  3. Install the SPAS sensor and connector.
  4. Install the SPAS sensor and connector.
  5. Install the front bumper.
Rear SPAS sensor / Side SPAS sensor

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.