Hyundai Tucson LM Quiz
Body Electrical System

Intelligent Parking Assist System Control Unit Repair Procedures

In this manual: Body Electrical System
General Information — 1Engine Mechanical System — 44Engine Electrical System — 45Emission Control System — 24Engine Control System/Fuel System — 93Clutch System — 13Manual Transmission — 18Automatic Transmission — 87Four-Wheel Drive (4WD) System — 26Drive Shaft and Axle — 29Suspension System — 35Steering — 20Restraints — 47Brake System — 36Body (Interior and Exterior) — 53Body Electrical System — 202Heating, Ventilation, and Air Conditioning — 58
10steps
~60min
3/5difficulty
Done 0 of 10

Removal
  • Using a flat-tip screwdriver, wrap protective tape around the tip and apply protective tape around the relevant parts to prevent damage.
  • Wear gloves to protect your hands.
  1. Using a screwdriver or trim remover, remove the passenger airbag panel (A). (Refer to Group BD - "Crash Pad")
  2. Remove the SPAS control unit (A) by loosening the nuts (2 pcs) and disconnecting the connectors.

Installation

  1. Connect the connectors and install the SPAS control unit (A).
  2. Install the passenger airbag panel.

Inspection

  1. SPAS (Intelligent Parking Assist System) can be diagnosed more quickly using GDS. SPAS communicates with GDS, then reads the input/output values and operates the actuators.
  2. To diagnose the SPAS (Smart Parking Assist System) function, select the model and SPAS from the menu.
  3. To view the current SPAS input/output values, select "Current Data". It provides information on the SPAS input/output conditions.
  4. To forcibly operate the SPAS input factors, select "Actuation Test".
  5. To check the DTC of each module, select "Diagnostic Trouble Codes".
  6. After replacing the SPAS control unit, perform the "SPAS Option Coding" procedure using GDS.

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.