Hyundai Tucson LM Quiz
Suspension System

Lower Arm Repair Procedures

In this manual: Suspension System
General Information — 1Engine Mechanical System — 44Engine Electrical System — 45Emission Control System — 24Engine Control System/Fuel System — 93Clutch System — 13Manual Transmission — 18Automatic Transmission — 87Four-Wheel Drive (4WD) System — 26Drive Shaft and Axle — 29Suspension System — 35Steering — 20Restraints — 47Brake System — 36Body (Interior and Exterior) — 53Body Electrical System — 202Heating, Ventilation, and Air Conditioning — 58
4steps
~24min
2/5difficulty
04080120160200107.980N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Replacement

  1. Remove the rear wheel and tire.

    Tightening torque: 88.3 ~ 108 N·m
    Be careful not to damage the hub bolts when removing the rear wheel and tire.
  2. Loosen the nuts and bolts, and remove the trailing arm (A) from the rear axle. Tightening torque: Trailing arm: 44.1 ~ 54 N·m Parking brake cable bracket: [4WD] 44.1 ~ 54 N·m [2WD] 8.8 ~ 13.7 N·m [2WD]
    [4WD]
  3. Loosen the mounting bolt and remove the trailing arm (A) from the frame.

    Tightening torque: 98.1 ~ 118 N·m

  4. Installation is the reverse of removal.

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.