Rear Trailing Arm Repair Procedures

Replacement

1. 1
   Remove the rear wheel and tire.

   Tightening torque: 88.3 ~ 108 N·m

   Be careful not to damage the hub bolts when removing the rear wheel and tire.

2. 2
   Remove the cotter pin and castellated nut or bolt, then disconnect the rear assist arm (A) from the rear axle. Tightening torque: 2WD 44.1 ~ 54 N·m 4WD 137.3 ~ 157 N·m (14.0 ~ 16.0 kgf·m, 101.3 ~ 115.7 lbf·ft) [2WD]

   

   [4WD]

   

3. 3
   Loosen the bolt and nut, and remove the rear assist arm (A) from the subframe.

   Tightening Torque: 107.9 ~ 118 N·m

   [2WD]

   

   [4WD]

   

4. 4
   Installation is the reverse of removal.

Inspection

1. 1
   Inspect the bushing for wear and damage.
2. 2
   Check the rear assist arm for deformation.
3. 3
   Check the ball joint for damage.
4. 4
   Check that all bolts and nuts are present.