KNOW YOUR VEHICLE

Rear Seat Removal

3steps
~18min
2/5difficulty
Done 0 of 3
  1. Press the latch on each side and pull the seat away from the lower bracket.
    Jeep Wrangler. Removing The Rear Seat

    Exhaust Outlet Location

  2. Remove the seat from the vehicle.
  3. To reinstall the rear seat, reverse these steps.

NOTE:

Do not drive the vehicle until the rear seat latches are reattached.

  • It is extremely dangerous to ride in a cargo area, inside or outside of the vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
  • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
  • Make sure everyone in your vehicle is in a seat and properly uses the seat belt.
  • In a collision, you or other occupants can be injured if the seats are not properly installed and latched to the floor anchors. Always make sure the seats are fully latched.

Test yourself

A quick Jeep Wrangler quiz: every answer comes with an explanation and a link to the manual page.