Jeep Wrangler Quiz
KNOW YOUR VEHICLE

HomeLink® Rolling Code Garage Door Opener Final Steps

In this manual: KNOW YOUR VEHICLE
INTRODUCTION — 5KNOW YOUR VEHICLE — 177GETTING TO KNOW THE INSTRUMENT PANEL — 77STARTING AND OPERATING — 126MULTIMEDIA — 106SAFETY — 89IN CASE OF EMERGENCY — 24SERVICE AND MAINTENANCE — 105SPECIFICATIONS — 16CUSTOMER ASSISTANCE — 7
3steps
~18min
2/5difficulty
Done 0 of 3

NOTE:

You have 30 seconds to start the rolling code, last step 2; after completing the rolling code, last step 1.

  1. On the garage door opener motor (in the garage), locate the "LEARN" or "TRAIN" button. It is usually found where the hanging antenna wire attaches to the garage door opener motor. Firmly press and release the "LEARN" or "TRAIN" button.
  2. Return to the vehicle and press the programmed HomeLink® button 3 times (holding the button for two seconds each time). If the garage door opener motor operates, programming is complete.
  3. Press the programmed HomeLink® button to verify that the garage door opener motor operates. If the garage door opener motor does not operate, repeat the final steps of the rolling code procedure.

Test yourself

A quick Jeep Wrangler quiz: every answer comes with an explanation and a link to the manual page.