Air Intake Duct Assembly (Other than US, CA and CAL Models)

• Install the seals [A] as shown in the figure.

• Fit the projections [A] of the air intake valve to the hole [B] of the air intake ducts.
• Tighten:

Torque - Air Intake Duct Assembly Screws: 1.5 NВ·m (0.15 kgfВ·m, 13 inВ·lb)

• Hang the shaft [A] to the air intake valve securely.

• Fit the projections [A] of the air intake valve actuator [B] to the grooves [C].
• Turn the air intake valve actuator clockwise (90В°).
• Check that the air intake valve moves smoothly
• Install the seal and screen to the air intake duct securely.
• Install the pad so that the open side faces downward.