Air Intake Duct Assembly (US, CA and CAL Models)

• Install the dampers [A] and seal [B] as shown in the figure.
• Fit the holder [C] to the air intake ducts [D].

Projections [E] and Holes [F] Grooves [G] and Ribs [H]

Tighten:

Torque - Air Intake Duct Assembly Screws [I]: 1.5 NВ·m (0.15 kgfВ·m, 13 inВ·lb)

• Turn the plug [J] so that the triangle marks [K] faces the front and rear.
• Install the seal [L] and screen [M] to the air intake duct securely.
• Install the pad [N] so that the open side [O] faces downward.