Battery Installation

• Visually inspect the surface of the battery container.

If any signs of cracking or electrolyte leakage from the sides of the battery.

• Put the battery into the rear fender
• Install the band [A].
• Connect the positive (+) cable [B] (red cap) to the positive (+) terminal first, and then the negative (–) cable [C] to the negative (–) terminal.
• Apply a light coat of grease on the terminals to prevent corrosion.
• Cover the positive (+) terminal with the red cap [D].

NOTICE

If each battery cable is not correctly disconnected or connected, sparks can arise at electrical connections, causing damage to electrical and DFI parts.