Compression Damping Force Adjuster and Rebound Damping Force Adjuster Adjustment

The compression damping force adjuster and the rebound damping force adjuster are located on top of each front fork leg.

• Turn the adjuster clockwise with a screwdriver to increase damping force.
• Turn the adjuster counterclockwise to decrease damping force.

NOTICE

Do not force to turn the rebound and compression damping force adjuster from the fully seated position, or the adjusting mechanism may be damaged.

A. Compression Damping Force Adjuster (COM)

B. Rebound Damping Force Adjuster (TEN)

C. Screwdriver

Compression Damping Force Setting and Rebound Damping Force Setting

*: This position is the fully seated position (turned fully clockwise).

**: Out from the fully seated position (turned fully clockwise). This adjustment range may not exactly match the number shown in the table due to small tolerance of production.

The standard front fork setting positions are as follows:

Standard Setting Position (Front Fork)

*: In from the fully seated position (turned fully counterclockwise) **: Out from the fully seated position (turned fully clockwise)