Kawasaki Ninja ZX-10R Quiz
Self-Diagnosis System

ESD Actuator Resistance Inspection

In this manual: Self-Diagnosis System
General Information — 26Periodic Maintenance — 66Fuel System (DFI) — 79Cooling System — 28Engine Top End — 51Clutch — 24Engine Lubrication System — 28Engine Removal/Installation — 5Crankshaft/Transmission — 65Wheels/Tires — 22Final Drive — 17Brakes — 54Suspension — 36Steering — 17Frame — 40Electrical System — 104Self-Diagnosis System — 112Appendix — 10
~1min read
  • Turn the ignition switch to OFF.
  • Remove the electronic steering damper unit (see Steering Damper Removal in the Steering chapter).
  • Connect a digitalmeter to the ESD actuator connector [A].
  • Measure the ESD actuator resistance.

ESD Actuator Resistance Connections: BK lead [1] ←→ O lead [3] R lead [2] ←→Y lead [4] Standard: About 23 29 Ω


ESD Actuator Resistance Inspection

If the reading is out of the standard, replace the electronic steering damper unit.

If the reading is within the standard, check the input voltage (see Idle ESD Actuator Input Voltage Inspection).

Test yourself

A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.