Kawasaki Ninja ZX-10R Quiz
Brakes

Front Master Cylinder Removal

In this manual: Brakes
General Information — 26Periodic Maintenance — 66Fuel System (DFI) — 79Cooling System — 28Engine Top End — 51Clutch — 24Engine Lubrication System — 28Engine Removal/Installation — 5Crankshaft/Transmission — 65Wheels/Tires — 22Final Drive — 17Brakes — 54Suspension — 36Steering — 17Frame — 40Electrical System — 104Self-Diagnosis System — 112Appendix — 10
~1min read
  • Remove the reservoir mounting bolt and nut [A].
Front Master Cylinder Removal

  • Unscrew the banjo bolt [A] and disconnect the brake hose from the master cylinder (see Brake Hose and Pipe Replacement in the Periodic Maintenance chapter).
  • Unscrew the clamp bolts [B], and take off themaster cylinder as an assembly with the reservoir, brake lever, and front brake light switch installed.
  • Disconnect the front brake light switch connector [C].
Front Master Cylinder Removal

NOTICE

Immediately wash away any brake fluid that spills.

  • Remove: Brake Lever Pivot Bolt [A] and Locknut [B] Brake Lever [C] Clamp [D] (Slide Out) Brake Hose [E] (Disconnect) Front Brake Light Switch [F]
Front Master Cylinder Removal

Test yourself

A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.