Rear Master Cylinder Installation

• Replace the washers that are on each side of hose fitting with new ones.
• Install the brake hose [A].

Touch the brake hose to the stopper [B] of the rear master cylinder.

• Tighten: Torque - Brake Hose Banjo Bolt: 25 NВ·m (2.5 kgfВ·m, 18 ftВ·lb)
• Install the master cylinder, the bracket and other parts (see Brake Pedal Installation).
• Bleed the brake line (see Brake Line Bleeding).
• Check the brake for good braking power, no brake drag, and no fluid leakage.

Front Master Cylinder Disassembly

• Refer to the Master Cylinder Rubber Parts Replacement in the Periodic Maintenance chapter.

Rear Master Cylinder Disassembly

• Refer to the Master Cylinder Rubber Parts Replacement in the Periodic Maintenance chapter.

Master Cylinder Assembly

• Refer to the Master Cylinder Rubber Parts Replacement in the Periodic Maintenance chapter.