Brakes
Rear Master Cylinder Removal
In this manual: Brakes
~1min read
- Unscrew the brake hose banjo bolt [A] and remove the brake hose (see Brake Hose and Pipe Replacement in the Periodic Maintenance chapter).
- Remove: Rear Master Cylinder Mounting Bolts [B] Foot Guard [C] Screw and Stopper [D] Bolt [E] Front Footpeg Bracket Bolts [F] Cable Guide [G]
- Remove: Cotter Pin [A] Joint Pin [B]
- Slide the clamp [A].
- Pull off the reservoir hose lower end [B], and drain the brake fluid into a container.
Test yourself
A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?