Starter Motor Disassembly

• Remove the starter motor (see Starter Motor Removal).
• Take off the starter motor through bolts [A] and remove the both end covers [B].

• Pull out the armature [A] out of the yoke [B].

NOTE

Do not remove the circlip [C] from the shaft.

• Remove the starter motor terminal locknut [A].

• Pull out the brushes from the brush holder [A].
• Remove: Brush Springs [B] Starter Motor Terminal [C] and O-ring Positive Brush Assy [D] Screw [E] Negative Brush Assy [F] Brush Holder