Kawasaki Ninja ZX-10R Quiz
Self-Diagnosis System

Subthrottle Valve Actuator Resistance Inspection

In this manual: Self-Diagnosis System
General Information — 26Periodic Maintenance — 66Fuel System (DFI) — 79Cooling System — 28Engine Top End — 51Clutch — 24Engine Lubrication System — 28Engine Removal/Installation — 5Crankshaft/Transmission — 65Wheels/Tires — 22Final Drive — 17Brakes — 54Suspension — 36Steering — 17Frame — 40Electrical System — 104Self-Diagnosis System — 112Appendix — 10
~1min read
  • Turn the ignition switch to OFF.
  • Disconnect the subthrottle valve actuator connector [A].
Subthrottle Valve Actuator Resistance Inspection

  • Connect a digital meter to the subthrottle valve actuator connector [A].
  • Measure the subthrottle valve actuator resistance.

Subthrottle Valve Actuator Resistance Connections: Y/BK lead [1] ←→ P/BL lead [2] G lead [3] ←→ BK/O lead [4] Standard: About 6.3 9.5 Ω


Subthrottle Valve Actuator Resistance Inspection

If the reading is out of the standard, replace the throttle body assy.

If the reading is within the standard, check the input voltage (see Subthrottle Valve Actuator Input Voltage Inspection).

Test yourself

A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.