Kia Cadenza VG Owner's Manual Quiz
Body Electrical System

Ventilated Seat Repair Procedures

In this manual: Body Electrical System
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
10steps
~60min
3/5difficulty
Done 0 of 10

Removal

[Front Seat]
  1. Remove the front seat assembly. (Refer to Body - "Front Seat")
  2. Remove the seatback trim cover and the seat cushion cover. (Refer to Body - "Front Seat")
  3. Loosen the screws and remove the retaining hook (B), then remove the ventilation duct (A).
  4. Remove the ventilation panel (A) and the retaining clip (B) from the seat cushion.
  5. Loosen the retaining clips and screws, then remove the climate control fan and duct (A).
  6. Loosen the mounting screws, then remove the climate control unit (A).

Installation

[Front Seat]
  1. Install the connectors and the ventilation control unit.
  2. Install the ventilation duct and fan.
  3. Install the seatback trim.
  4. Install the seat assembly and the seat rail cover.

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.