Seat Heater Switch Repair Procedures

Inspection

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the floor console upper cover (A). (Refer to Body - "Console")
3. 3
   Disconnect the connector (A) of the seat heater switch from the floor console upper cover.

   

4. 4
   Turn on each seat heater switch and check for continuity between the terminals. If there is no continuity, replace the seat heater switch. [Ventilation + Heater]

   

   [Ventilation + Heater]

   

   [Heater]

   

5. 5
   Disconnect the negative (-) battery terminal.
6. 6
   Open the rear seat armrest (A).

   

7. 7
   Remove the rear seat armrest upper cover (A).

   

8. 8
   Disconnect the connector (A).

   

9. 9
   Turn on the rear seat heater and check the circuit continuity between the terminals.

   

   

10. 10
    If there is no continuity, replace the rear seat heater switch (A).