Kia Cadenza VG Owner's Manual Quiz
Body Electrical System

Power Seat Control Switch Repair Procedures

In this manual: Body Electrical System
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
7steps
~42min
2/5difficulty
Done 0 of 7

Inspection

With the power seat switch in each position, check that continuity exists between the terminals below. If continuity does not match the specification, replace the power seat switch. A: Power Seat Control Switch B: Lumbar Support Switch

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the switches (A) from the side seat cover.
  3. Remove the side seat cover (A). (Refer to Body - "Front Seat")
  4. Disconnect the connector of the power seat control switch (A).
  5. Loosen the mounting screws of the power seat control switch (A) (3EA).

Installation

  1. Connect the connectors and install the IMS control switch.
  2. Install the side seat cover.

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.