Kia Cadenza VG Owner's Manual Quiz
Engine Mechanical System

Cooling Fan Repair Procedures

In this manual: Engine Mechanical System
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
8steps
~48min
2/5difficulty
0102030405010.88N·mlb·ft
Tightening torque found on this page
Done 0 of 8

Removal and Installation

Cooling Fan Assembly

  1. Disconnect the negative battery cable.
  2. Remove the air duct (A).
  3. 3. Loosen the upper hose mounting bolt (A) and disconnect the fan motor connector (B).
    The radiator hoses are still connected.
  4. Remove the cooling fan assembly (A).

    Tightening torque: 6.9 ~ 10.8 N·m

  5. Install in the reverse order of removal.

Inspection

  1. Disconnect the fan motor connector from the resistor.
  2. Connect battery voltage to the "+" terminal and ground to the "-" terminal.
  3. Check that the cooling fan motor operates properly.

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.