Body Electrical System
IMS Control Switch Repair Procedures
In this manual: Body Electrical System
8steps
~48min
2/5difficulty
Done 0 of 8
Inspection
- Disconnect the IMS control switch connector.
- With the IMS control switch in each position, check that continuity exists between the terminals below. If continuity does not match the specification, replace the IMS control switch.
Removal
- Disconnect the negative (-) battery terminal.
- Remove the front door panel. (Refer to Body - "Front Door")
- Disconnect the connector of the IMS switch (A) from the front door trim panel.
- Remove the IMS control switch.
Installation
- Connect the connectors and install the IMS control switch.
- Install the front door trim panel.
Test yourself
A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?