Body Electrical System
IMS Power Seat Repair Procedures
In this manual: Body Electrical System
9steps
~54min
2/5difficulty
Done 0 of 9
Inspection
- Disconnect the connector of the IMS control switch (A).
- With the IMS control switch in each position, check that continuity exists between the terminals below. If continuity does not match the specification, replace the IMS control switch. Driver Power Seat Control Switch (for IMS)
Removal
- Disconnect the negative (-) battery terminal.
- Remove the switch (A) from the side seat cover.
- Remove the side seat cover (A). (Refer to Body - "Front Seat")
- Disconnect the connector of the IMS control switch (A).
- Loosen the mounting screws of the IMS control switch (A) (3EA).
Installation
- Connect the connectors and install the IMS control switch.
- Install the side seat cover.
Test yourself
A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?