Rear Shock Absorber Repair Procedures

Replacement

1. 1
   Remove the rear wheel and tire.

   Tightening torque: 88.3 ~ 108 N·m

   Be careful not to damage the hub bolts when removing the rear wheel and tire.

2. 2
   Loosen the bolt and nut, then disconnect the shock absorber (A) from the rear axle.

   Tightening torque: 137.3 ~ 157 N·m (14.0 ~ 16.0 kgf·m, 101.3 ~ 115.7 lbf·ft)

   

3. 3
   Loosen the shock absorber mounting bolts (A).

   Tightening torque: 49.0 ~ 64 N·m

   

4. 4
   Installation is the reverse of removal.
5. 5
   Inspect the rubber components for wear and deterioration.
6. 6
   Compress and extend the piston rod (A) and make sure there is no abnormal resistance or unusual noise during operation.