Driveshaft and axle
BJ Boot Repair procedures
In this manual: Driveshaft and axle
7steps
~42min
2/5difficulty
Done 0 of 7
Replacement
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
Remove the TJ joint assembly.
(Refer to Driveshaft Assembly - “TJ Joint”)
Remove the Dynamic damper.
(Refer to Driveshaft Assembly - “Dynamic Damper”)
Using a plier or flat-tipped (-) screwdriver, remove the BJ boot bands (A).

Remove the BJ boot.
Install in the reverse order of removal.
Check the front alignment.
(Refer to Suspension System - "Front Alignment")
Was this page helpful?