Restraint
Front Impact Sensor (FIS) Repair procedures
In this manual: Restraint
3steps
~18min
2/5difficulty
Done 0 of 3
Removal
Disconnect the battery negative terminal, and wait for at least thirty seconds before beginning work.
Disconnect the front impact sensor connector (A).

Loosen the mounting bolts. Remove the front collision detection sensor (B).
Tightening torque: 8.0 - 10.0 N.m (0.8 - 1.0 kgf.m, 5.9 - 7.3 lb-ft)

Installation
Install in the reverse order of removal
Was this page helpful?