Suspension System
Front Lower Arm Repair procedures
In this manual: Suspension System
10steps
~60min
3/5difficulty
Done 0 of 10
Removal
Remove the wheel and tire.
Tightening torque: 107.9 - 128 N·m

Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
Remove the lower arm pin (A) and nut (B).
Tightening torque: 78.4 - 98 N·m

Remove the lower arm (A) from the sub frame.
Tightening torque:
B : 117.7 - 137 N·m
C : 156.9 - 176 N·m

Install in the reverse order of removal.
Check the wheel alignment.
(Refer to Tires/Wheels - "Alignment")
Inspection
Check the bushing for wear and deterioration.
Check the lower arm for bending or breakage.
Check the lower arm for deformation.
Check all bolts and nuts.
Was this page helpful?