Rear Door Module Repair procedures
Replacement
Remove the rear door window glass.
(Refer to Rear Door - "Rear Door Window Glass")
Remove the rear door channel (A) after loosening the mounting bolts and nut.
Tightening torque :
Bolt : 6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 8.0 lb-ft)
Nut : 3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)

Disconnect the rear door main wiring connector cover (A).
Disconnect the rear door main wiring connector (A).
Remove the rear door module (A) after loosening the mounting bolts.
Tightening torque : Bolt : 7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb-ft)

Disconnect the rear door latch connector (A).

Remove the rear door module (B) from the inside handle (A) by pulling in the direction of the arrow.

Remove ther rear door main wiring (A).

Remove the rear speaker.
(Refer to Body Electrical System - "Speakers")
Remove the rear power window motor.
(Refer to Body Electrical System - "Power Window Motor")
Install in the reverse order of removal.