Body (Interior and Exterior)

Rear Door Trim Repair procedures

7steps
~42min
2/5difficulty
Done 0 of 7

Replacement

  1. Remove the rear door delta inner cover (A) using a remover.

  2. Remove the rear door inside cap (A) and then loosen the screws.

  3. Remove the rear door pull cap (A) and then loosen the screws.

  4. Remove the rear door trim (A).

  5. Remove the rear door inside handle cage (A).

  6. Disconnect the power window switch connector (A).

  7. Install in the reverse order of removal.