Engine Electrical System

Repair procedures

6steps
~36min
2/5difficulty
Done 0 of 6

On-vehicle Inspection

Check The Auxiliary 12V Battery Terminals And Fuses

  1. Check that the auxiliary 12V battery terminals are not loose or corroded.

  2. Check the fuses for continuity.

Check Discharge Warning Light Circuit

  1. Warm up the engine and then turn it off.

  2. Turn off all accessories.

  3. Turn the ignition switch "ON". Check that the discharge warning light is lit.

  4. Start the engine and Check that the light goes off.

    If the light does not go off as specified, then refer to the LDC diagnostics section for further diagnosis of auxiliary 12V battery charging system problem.