Body Electrical System
Hands-Free Switch Repair Procedures
In this manual: Body Electrical System
15steps
~90min
4/5difficulty
Done 0 of 15
Inspection
- Check the hands-free remote control switch for resistance between terminals at each switch position. [Audio/Bluetooth]
[Voice Recognition]
[Bluetooth]
Switch Connector
TerminalResistance
(±5%)Send 2-7 18, 91K? End Call 2-7 40, 91K?
[Voice Recognition]Switch Connector
TerminalResistance
(±5%)Voice Audio/Bluetooth Connector 2 and Voice Recognition Connector 3 10, 71K?
Removal
[Upper Remote Control Switch on Steering Wheel]- Disconnect the negative (-) battery terminal.
- Remove the driver airbag module. (Refer to Group RT)
- Remove the steering wheel. (Refer to Group ST - "Steering Column and Shaft")
- Loosen the mounting screws on the steering wheel rear cover.
- Separate the upper left steering wheel remote control switch (A) after loosening the mounting screw.
- Remove the upper left steering wheel remote control switch (A) after disconnecting the connector.
- Disconnect the negative (-) battery terminal.
- Remove the driver airbag module. (Refer to Group RT)
- Remove the steering wheel. (Refer to Group ST - "Steering Column and Shaft")
- Loosen the mounting screws on the steering wheel front cover.
- Remove the upper left steering wheel cover (A) after loosening the mounting screws.
- Remove the upper steering wheel remote control switch (A) after disconnecting the connector. [Left]
[RH]
- Remove the steering wheel cover (A) after loosening the mounting screws on the steering wheel front cover.
- Remove the steering wheel front cover (B) after disconnecting the connector (A).
- Remove the lower steering wheel remote control switch (B) after disconnecting the connector (A).
Test yourself
A quick Kia Optima Hybrid Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?