Kia Optima Hybrid Owner's Manual Quiz
Body Electrical System

Parking Assist Sensor Repair Procedures

In this manual: Body Electrical System
General Information — 4Engine Mechanical System — 50Engine Electrical System — 20Emission Control System — 30Engine Control System/Fuel System — 84Automatic Transmission — 98Drive Shaft and Axle — 15Suspension System — 36Steering — 12Restraints — 50Brake System — 38Body (Interior and Exterior) — 54Body Electrical System — 233Heating, Ventilation, and Air Conditioning — 57
6steps
~36min
2/5difficulty
Done 0 of 6

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front/rear bumper. (Refer to Body - "Front Bumper Cover") (Refer to Body - "Rear Bumper Cover")
  3. Disconnect the connector (A) from the sensor. [Front]
    [Rear]
  4. Pull out the sensor (A) by opening the sensor holder (B). [Front]
    [Rear]

Installation

  1. Connect the connector, then install the sensor.
  2. Install the bumper.

Test yourself

A quick Kia Optima Hybrid Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.