Kia Optima Hybrid Owner's Manual Quiz
Brake System

Yaw Rate and Lateral Acceleration Sensor Repair Procedures

In this manual: Brake System
General Information — 4Engine Mechanical System — 50Engine Electrical System — 20Emission Control System — 30Engine Control System/Fuel System — 84Automatic Transmission — 98Drive Shaft and Axle — 15Suspension System — 36Steering — 12Restraints — 50Brake System — 38Body (Interior and Exterior) — 54Body Electrical System — 233Heating, Ventilation, and Air Conditioning — 57
5steps
~30min
2/5difficulty
0102030405010.88N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the floor console. (Refer to Body group - Console)
  3. Disconnect the yaw rate and lateral acceleration sensor connector (A).
  4. Remove the mounting nuts (B).

    Tightening torque: 6.9 ~ 10.8 N·m

  5. Installation is the reverse of removal.

Test yourself

A quick Kia Optima Hybrid Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.