Kia Sorento Owner's Manual Quiz
Kia Sorento XM 2011-2023 Repair Manual

CVVT and Camshaft Removal

In this manual: Kia Sorento XM 2011-2023 Repair Manual
Kia Sorento XM Owner's Manual. — 168Kia Sorento XM 2011-2023 Repair Manual — 1285
7steps
~42min
2/5difficulty
Done 0 of 7
  1. Remove the cylinder head cover. (Refer to Cylinder Head Assembly - Cylinder Head Cover)
  2. Set the No. 1 cylinder to TDC/compression.
    A. Turn the crankshaft pulley and align its groove with the "T" mark on the timing chain lower cover.
    B. Make sure that the mark (A) on the CVVT sprockets is aligned straight with the cylinder head surface, as shown in the illustration. If not, turn the crankshaft one full revolution (360°).
  3. Remove the service hole bolt (A) from the timing chain cover.
  4. Release the timing chain tensioner ratchet by pulling the link down with a thin rod.
  5. Remove the high-pressure fuel pump bracket (A).
  6. Remove the camshaft.
    1. Remove the front camshaft bearing cap (A) with the upper bearing (B).
    2. Remove the camshaft bearing caps (A) in the sequence shown.
    3. Remove the exhaust CVVT assembly and camshaft (A).
    4. Remove the intake CVVT unit and camshaft (A).
  7. Disconnect the intake CVVT assembly (A) and the exhaust CVVT assembly (B) from the camshaft (C).

Test yourself

A quick Kia Sorento Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.