Kia Sorento XM 2011-2023 Repair Manual
Removal of Timing Chain Cover
In this manual: Kia Sorento XM 2011-2023 Repair Manual
15steps
~90min
5/5difficulty
Done 0 of 15
- Disconnect the negative battery cable.
- Remove the engine cover.
- Remove the air duct.
- Remove the air cleaner assembly.
- Remove the right front wheel.
- Remove the lower covers.
- Remove the drive belt. (Refer to Valve Timing System - "Drive Belt")
- Remove the cylinder head cover. (Refer to Cylinder Head Assembly - Cylinder Head Cover)
- Remove the lower A/C compressor bolts. (Refer to Heating, Ventilation, Air Conditioning - "Compressor")
- Remove the oil pan. (Refer to Lubrication System - "Oil Pan")
- Install a jack under the edge of the ladder frame.
- Disconnect the ground line, then remove the engine mount bracket. (Refer to Engine and Transaxle Assembly - "Engine Mount")
- Remove the idler pulley (A), water pump pulley (B), crankshaft pulley (C) and drive belt tensioner pulley (D).

- Remove the drive belt tensioner. (Refer to Valve Timing System - Drive Belt Tensioner)
- Remove the timing chain cover (A) by carefully prying between the cylinder head and cylinder block.

Test yourself
A quick Kia Sorento Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?