Rear Coil Spring Repair Procedures

Replacement

1. 1
   Loosen the wheel nuts slightly. Raise the vehicle and make sure it is securely supported.
2. 2
   Remove the front wheel and tire (A) from the front hub.

   Tightening torque: 88.2 ~ 108 N·m

   

   Be careful not to damage the hub bolts when removing the rear wheel and tire (A).

3. 3
   Loosen the bolt and remove the rear shock absorber (A) from the torsion beam axle.

   Tightening torque: 98.1 ~ 118 N·m

   

4. 4
   Disconnect the electric parking brake connector.

   

5. 5
   Remove the bolt (A), then remove the clip (B) and the wheel speed sensor cable from the fixed bracket.

   

6. 6
   Pull the torsion beam axle downward and remove the coil spring (A).

   

7. 7
   Installation is the reverse of removal.

Inspection

1. 1
   Check the coil spring for cracks and deformation.
2. 2
   Check the coil spring insulator for damage and deformation.