Body (Interior and Exterior)

Rear Seat Belt Buckle Repair Procedures

7steps
~42min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Replacement

[LH]
  1. Disconnect the rear seat belt lower anchor (C) by pressing the stopper pin (B) of the center mini buckle (A) with a flat-tip screwdriver.
  2. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly")
  3. Loosen the mounting bolt and remove the rear seat belt buckle [LH] (A).

    Tightening torque: 39.2 ~ 54 N·m

  4. Install in the reverse order of removal.

[RH]

  1. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly")
  2. Loosen the mounting bolt, then remove the rear seat belt buckle [RH] (A).

    Tightening torque: 39.2 ~ 54 N·m

  3. Install in the reverse order of removal.

Test yourself

A quick Kia Soul EV Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.