Kia Soul EV Owner's Manual Quiz
Body (Interior and Exterior)

Rear Seat Belt Pretensioner Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 17Maintenance — 17Drive Shaft and Axle — 15Suspension System — 36Steering — 24Restraints — 48Brake System — 37Body (Interior and Exterior) — 207Body Electrical System — 203Heating, Ventilation, and Air Conditioning — 80Electric Vehicle Battery System — 115
4steps
~24min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Replacement
  • When installing the belt, be careful not to damage the pretensioner.
  1. Remove the rear pillar garnish. (Refer to Interior Trim - "Rear Pillar Trim")
  2. Loosen the rear seat belt upper anchor mounting bolt (A).
  3. Loosen the mounting bolt and remove the rear seat belt pretensioner (B).

    Tightening torque: 39.2 ~ 54 N·m

  4. Install in the reverse order of removal.
    • Make sure the connectors are connected correctly.
    • Replace all damaged clips.

Test yourself

A quick Kia Soul EV Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.