Front Seat Adjustment - Power Seat

The front seat can be adjusted using the switches located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so that you can easily operate the steering wheel, pedals, and switches on the instrument panel.

WARNING - Children Left Unattended

Do not leave children unattended in the vehicle. Children may operate vehicle functions which could result in injury to them.

WARNING - Power Seat Adjustment

Power seats are operated by an electric motor. Excessive operation may cause damage to the electrical components.

WARNING - Power Seats

Do not operate two or more power seat control switches at the same time. Doing so may damage the power seat motor or electrical components.

The power seat consumes a large amount of electrical power during operation. To prevent unnecessary battery discharge, do not operate the power seat longer than necessary while the engine is off.

Forward and Backward

Press the control switch forward or backward to move the seat to the desired position. When the control switch is moved forward, the front of the seat cushion rises slightly, and the seat cushion lowers when the switch is moved backward.

Release the switch as soon as the seat reaches the desired position.

Cushion Extension (Driver's Seat, if equipped)

To move the front of the seat cushion forward:

1. Press the front of the control switch to move the seat cushion to the desired length.

2. Release the switch as soon as the seat cushion reaches the desired length.

To move the front of the seat cushion rearward:

1. Press the rear of the control switch to move the seat cushion to the desired length.

2. Release the switch as soon as the seat cushion reaches the desired length.

Seatback Angle

Press the control switch forward or backward to move the seatback to the desired angle. Release the switch as soon as the seatback reaches the desired position.

Seat Height

Pull up the front of the control switch to raise, or press down to lower the front of the seat cushion. Pull up the rear of the control switch to raise, or press down to lower the rear of the seat cushion. Release the switch as soon as the seat reaches the desired position.

Lumbar Support

The lumbar support can be adjusted by pressing the lumbar support switch on the side of the seat.

1. Press the front of the switch to increase support, or the rear of the switch to decrease support.

2. Release the switch as soon as it reaches the desired position.

3. Press the upper part of the switch to move the lumbar support upward, or press the lower part of the switch to move the lumbar support downward.

4. Release the switch when it reaches the desired position.

Seatback Control

1. Turn the adjustment switch clockwise to adjust the seatback cushion inward. Turn the switch counterclockwise to adjust the seatback cushion outward.

2. To adjust the maximum lumbar height to the default state, press and hold the switch for 8 seconds. After that, release the switch; there is no height change even if you continue to press the switch.

3. After adjustment is complete, leave the switch in place.