Kia Cee'd Quiz
Body Electrical System

Blind Spot Detection Indicator Repair Procedures

In this manual: Body Electrical System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
6steps
~36min
2/5difficulty
Done 0 of 6

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the outside mirror (A) from the mirror holder.
  3. Disconnect the heater connector (A) and the BSD indicator connector (B) from the mirror.

Installation

  1. Connect the mirror heater connector and the BSD indicator connector.
  2. Install the mirror.
  3. Connect the negative (-) battery terminal.

Inspection

  1. Make sure the mirror operates correctly, as shown in the table below.
    BSD warning lamp

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.