Kia Cee'd Quiz
Engine Mechanical System

Crankshaft Damper Pulley Repair Procedures

In this manual: Engine Mechanical System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
5steps
~40min
3/5difficulty
2special tools
0204060801005238N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Removal and Installation

  1. Remove the drive belt. (Refer to Timing System - "Timing Belt")
  2. Remove the engine room cover.
  3. Remove the front wheel on the passenger side.
  4. Remove the crankshaft damper pulley (A). Tightening torque: 46.1 ~ 52 N·m + 38 ~ 42°
  5. When installing the pulley, the groove on the pulley must face outward.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.