Kia Cee'd Quiz
Body (Interior and Exterior)

Glove Box Housing Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
9steps
~54min
3/5difficulty
Done 0 of 9

Replacement

  1. Using a screwdriver or a trim removal tool, remove the side cover of the garnish [RH] (A).
  2. Disconnect the passenger airbag switch connector (A).
  3. Disconnect the plug (B) from the glove box (A).
  4. Disconnect the air duct (A) from the glove box (B).
  5. Disconnect the pins (A) and remove the glove box (B).
  6. Remove the glove box housing by removing the mounting screws (A).
  7. Disconnect the glove box lamp connector (A).
  8. Disconnect the glove box lamp switch connector (A).
  9. Install in the reverse order of removal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.