Kia Cee'd Quiz
Body (Interior and Exterior)

Cluster Fascia Panel Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
11steps
~66min
3/5difficulty
Done 0 of 11

Replacement

  1. Using a screwdriver or trim tool, remove the [LH] decorative trim (A).
  2. Disconnect the connector of the power outside rearview mirror switch (A).
  3. Using a screwdriver or a trim removal tool, remove the upper steering column shroud panel (A).
  4. Using a screwdriver or trim tool, remove the instrument panel cylinder cover (A).
  5. Using a screwdriver or a trim remover, remove the center fascia panel (A).
  6. Disconnect the connector of the start/stop button (A).
  7. Loosen the mounting screws and remove the center air duct (A).
  8. Disconnect the hazard warning switch connector (A) and the ESC OFF switch connector (B).
  9. Loosen the mounting screws and remove the side air duct [LH] (A).
  10. After loosening the mounting screws, remove the upper cluster facia panel (A).
  11. Install in the reverse order of removal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.