Kia Cee'd Quiz
Body (Interior and Exterior)

Crash Pad Center Panel Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
12steps
~72min
3/5difficulty
Done 0 of 12

Replacement

  1. Remove the boots (B) and the shift lever (A).
  2. Using a screwdriver or removal tool, remove the console trim (A). [LH]
    [RH]
  3. Using a screwdriver or remover, remove the console upper cover (A).
  4. Disconnect the indicator connector (A).
  5. Disconnect the EPB switch connector (A).
  6. After loosening the mounting screws, remove the console tray (A).
  7. Disconnect the connectors (A).
  8. Remove the crash pad lower panel. (Refer to Crash Pad - "Crash Pad Lower Panel")
  9. Remove the glove box housing. (Refer to Crash Pad - "Glove Box Housing")
  10. Loosen the mounting screws and remove the crash pad center lower panel (A).
  11. Disconnect the heater control unit connector (A), console tray lamp connector (B), and heater hose (C).
  12. Install in the reverse order of removal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.